AISI 302 Stainless Steel Plate

1:Round bar: 8mm-2000mm 2:Plate/Sheet: 2mm-200mm 3:Pipe/Tube: OD: 80mm-3000mm 4:Wire:0.01-15mm 5:Forgings: 0.5-10000Kg

1. Specifications:

 

    1)    Round bar:

 

Diameter: 8mm-2000mm

 

    2)    Plate/Sheet:

 

Thickness: 2mm-200mm

 

    3)    Pipe/Tube:

 

OD: 80mm-3000mm Thickness: 0.3-20mm

 

     4)    Coil:

 

Thickness: 0.3-80mm, Width: 1000-2000mm

 

    5)    Forgings:

 

Weight: 0.5-10000Kg

 

Note: We can supply any length based on the customer's requirement.

 

2. Chemical Composition

 

C	Si	Mn	P ≤	S≤	Cr	Ni
max 0.15	max 1.00	max 2.00	0.045	0.030	17.0-19.0	8.00-10.00

 

3. Application: 

Stainless steel’s resistance to corrosion and staining, low maintenance and familiar lustre make it an ideal material for many applications. There are over 150 grades of stainless steel, of which fifteen are most commonly used. The alloy is milled into coils, sheets, plates, bars, wire, and tubing to be used in cookware, cutlery, household hardware, surgical instruments, major appliances, industrial equipment (for example, in sugar refineries) and as an automotive and aerospace structural alloy and construction material in large buildings. Storage tanks and tankers used to transport orange juice and other food are often made of stainless steel, because of its corrosion resistance and antibacterial properties. This also influences its use in commercial kitchens and food processing plants, as it can be steam-cleaned and sterilized and does not need paint or other surface finishes.

Heat Resistantant Applications: Steel furnaces, Boilers, Cement and lime kilns, Glass and ceramic furnaces, Incinerators, Heat exchangers, etc.

4. Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement

 

5. Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement

 

6. Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode

 

7. Ultrasonic inspection: 100% ultrasonic inspection for any imperfections or based on the customer's requirement.

 

8. UTS: According to SEP 1921 C/c, D/d, E/e; A388 or GB/T 6402

 

9. Other Products: We can also produce steel products below:

 

1) Corrosion Resisting Alloy: Monel400, Inconel600, Inconel625, Inconel690, Incoloy800 (H), Incoloy825, HastelloyB, HastelloyB2, HastelloyC-4, HastelloyC-22, HastelloyC-276 and HastelloyG30

2) High-Temperature Alloy: GH30, GH39, GH33 (A), GH37, GH44, GH128, GH132 (A-286), GH145 (Inconel750) and GH169 (Inconel718)

3) Stainless Steel: 1Cr17Ni2 (431), 0~1Cr25Ni20Si2 (310S), 3Cr24Ni7SiNRe, 3Cr17Ni7Mo2N (318), 0Cr17Ni17Mo7Cu2, 00Cr25Ni22Mo2N (U2), 00Cr20Ni24Si4Ti (C6L), 00Cr20Ni25Mo5Cu2 (904L), 0Cr12Ni25Mo3Cu3Si2Nb (941), 0Cr20Ni26Mo3Cu3Si2Nb (RS-2), 0Cr17Ni4Cu4Nb (17-4PH), 0Cr15Ni5Cu2Nb (15-5PH), 0Cr15Ni7Mo2Al (15-7Ph), 0Cr13Ni8Mo2Al (Ph13-8Mo), S45500 (XM-16), S45000 (XM-25), 0Cr26Ni5Mo2 (329J1), 00Cr22Ni5Mo2N (2205) and Y0Cr17(430F)

4) Steel Industrial Moulds: Cr12MoV, Cr12Mo1V1 (D2), 4Cr5MoSiV1 (H13), NAK80 and 3Cr2Mo (P20)

5) A-Structural Steel: 12Cr1MoV, 12CrNi3A, 34CrNi3Mo, 45CrNiMoVA, 40CrNiMoA, 5CrNiMo, 20Cr2Ni4A and FD-1

6) Maraging Steel: 18Ni, 20Ni and 25Ni

7) Cold Rolled Silicon Steel with grain orientation: F30Q130

 

 

We are OEM and we serve you with our honesty, integrity, and professional knowledge.

 

                   

AISI 302 Stainless Steel Plate